|
The Expert of Flow Meters
|
DigiPro-turbine flow meter(Paddle
Wheel flowmeter) |
|
 |
|
» |
Turbine Flow meter |
|
» |
DigiPro impeller-type insertion meters designed for use in pipe
sizes 1/2" to 8". |
|
» |
High-quality
jewel bearings and nickel-bound tungsten carbide shaft are used for
maximum life and extreme low friction. |
|
» |
Bodies
are machined from solid rod for maximum precision. |
|
» |
Lowflow performance is superior. |
|
» |
The
rotation of the rotor is detected by a non-drag Hall-effect sensor. |
|
» |
Output
is a pulse-type square wave, which can be sent long distances (up to
2,000 feet) without a transmitter. |
|
» |
This
signal can be connected directly to Teksan controls, as well as
PLC's, counters, and computer cards. |
|
» |
DigiPro flow sensors are ideal for chemical proportioning
applications. |
|
» |
If no
display is required, a simple divider such as the PD10 provides
adjustable pump pacing. |
|
» |
For
rate and total display, as well as pump pacing, the FT415/420
flowndicator can be mounted directly on the DigiPro IP80 Series, or
remotely on a wall or panel. |
|
» |
The
DigiPro IP80 Series require special fittings, since they are not
depth-adjustable as are the IP 100/200 series meters. |
|
» |
Installation in the fitting ensures correct depth placement in the
pipe. |
|
» |
Fittings are available in PVC, brass, and stainless steel. Sensors
are available in brass, 316 stainless steel, PVC, and polypropylene. |
|
» |
In
plastic pipe 3"-8", Use an IP82 sensor, which is 1.00" longer than
the IP81 to accommodate the larger fittings. |
|
|
|
|
15 |
20 |
25 |
40 |
50 |
80 |
100 |
150 |
200 |
|
Technical Data
|
| Minimum Flow |
lt/min |
1 |
1,8 |
3 |
7 |
12 |
26 |
45 |
100 |
178 |
| Maximum Flow |
lt/min |
100 |
189 |
300 |
700 |
1200 |
2600 |
4500 |
10000 |
17800 |
|
|
|
Sensor |
| Hall Effect Sensor |
12V DC
current sinking pulse |
|
Material |
| Sensor Body |
PVC,
Polypro, Brass or 316 SS |
| Rotor |
PVDF (Kynar)
|
| Shaft |
Nickel-bound
tungsten carbide, ceramic optional |
| Bearings |
Ruby jewel |
|
Maximum Pressure |
| PVC |
12 bar (24
°C) |
| Polypro |
12 bar (24
°C) |
| Brass |
14 bar
|
| 316 SS |
17 bar
|
|
Maximum Temperature |
| PVC, Polypro |
55 °C
|
| Brass, SS |
93 °C
|
|
Accuracy |
| - |
%1.5 F.S. |
|
Turbine flow meter manufacturer Turkey.
|
DigiFlo |
|
 |
|
» |
Turbine Flowmeters |
|
» |
Large,
high intensity transreflective LCD 50 x 30 mm with 6 large digits
and 6 small digits. |
|
» |
Both
digits can be used for totalizer or flow rate display. |
|
» |
10
icons for information and warning purposes |
|
» |
Easy
setup and installation |
|
» |
Automatically saves user configuration in non-volatile memory |
|
» |
Modular style allows easy add-on module integration |
|
» |
Setup
can be modified via computer using RS232 communication |
|
» |
Backup
of accumulated totals for both totalizers and flow rate every minute. |
|
» |
Statistical data can be obtained for the last 10 days |
|
» |
On
site firmware upgrade available |
|
» |
Many
outputs for multiple purposes |
|
» |
Signal
output with active or passive output |
|
» |
Can be
used for resettable meter purposes |
|
» |
Easier
reading with the help of analog indicators |
|
» |
Batch
functionality on advanced models |
|
» |
All
settings are password protected |
|
|
|
|
 |
 |
 |
 |
|
Technical Data |
| Model |
|
TRB |
TRP |
TFP |
MFP |
| Nominal Size of Meter
Flange |
|
DN20 - DN40 |
DN50 |
DN50 |
DN50 - DN800 |
| Type of Connection |
|
Fitting |
Fitting |
Flange (DIN
2501) |
Flange (DIN
2501) |
| Display Features |
|
Cable |
Cable |
Cable |
Cable or on
Flowmeters |
| Turbine Type |
|
Multi-Jet |
Multi-Jet |
Multi-Jet |
Woltman |
| Turbine Material |
|
Plastic |
Plastic |
Plastic |
Plastic |
| Body Material |
|
Bronze |
Iron (GG25) |
Iron (GG25) |
Iron (GG25) |
| Cover Type |
|
Electrostatic powder paint |
Electrostatic powder paint |
Electrostatic powder paint |
Electrostatic powder paint |
| Type of Instalation |
|
Horizontal |
Horizontal |
Horizontal |
Horizontal,
Vertical or Angular |
| Nominal Working Pressure |
|
10 bar |
10 bar |
10 bar |
16 bar |
| Typical Head Loss Cruve |
|
DN20 = 0,6
bar DN25 & DN40 = 1 bar |
1 bar |
1 bar |
cf. Typical
Head Loss Cruve's Chart |
|
|
20 |
25 |
40 |
50 |
50 |
|
Technical Data |
| Model |
- |
TRB |
TRB |
TRB |
TRP |
TFP |
| Minimum Flow (Qmin) |
m³/h |
0,03 |
0,07 |
0,2 |
0,45 |
0,45 |
| Transitional Flow (Qt) |
m³/h |
0,12 |
0,28 |
0,80 |
3 |
3 |
| Nominal Flow (Qn) |
m³/h |
1,5 |
3,5 |
10 |
15 |
15 |
| Maximum Flow (Qmax) |
m³/h |
3 |
7 |
20 |
30 |
30 |
|
|
|
DigiFlo's Models |
| 1100 Series
|
| -1110 – 2 totalizers (one
of them resettable) |
| -1120 - 1120 – Flow rate
display + 1110 features |
| -1130 – Pulse output +
1120 features |
| -1140 - 1140 – High / low
flow rate alarms + 1130 features |
| 1200 Series
|
| -1210 – Batch
functionality + 1100 Series features |
|
|
DigiFlo-Turbine flow
meter manufacturer |
|
 |
|
» |
Turbine Flowmeters |
|
» |
Large,
high intensity transreflective LCD 50 x 30 mm with 6 large digits
and 6 small digits. |
|
» |
Both
digits can be used for totalizer or flow rate display. |
|
» |
10
icons for information and warning purposes |
|
» |
Easy
setup and installation |
|
» |
Automatically saves user configuration in non-volatile memory |
|
» |
Modular style allows easy add-on module integration |
|
» |
Setup
can be modified via computer using RS232 communication |
|
» |
Backup
of accumulated totals for both totalizers and flow rate every minute. |
|
» |
Statistical data can be obtained for the last 10 days |
|
» |
On
site firmware upgrade available |
|
» |
Many
outputs for multiple purposes |
|
» |
Signal
output with active or passive output |
|
» |
Can be
used for resettable meter purposes |
|
» |
Easier
reading with the help of analog indicators |
|
» |
Batch
functionality on advanced models |
|
» |
All
settings are password protected |
|
|
|
|
|
|
|
|
|
Technical Data |
| Model |
|
TRB |
TRP |
TFP |
MFP |
| Nominal Size of Meter
Flange |
|
DN20 - DN40 |
DN50 |
DN50 |
DN50 - DN800 |
| Type of Connection |
|
Fitting |
Fitting |
Flange (DIN
2501) |
Flange (DIN
2501) |
| Display Features |
|
Cable |
Cable |
Cable |
Cable or on
Flowmeters |
| Turbine Type |
|
Multi-Jet |
Multi-Jet |
Multi-Jet |
Woltman |
| Turbine Material |
|
Plastic |
Plastic |
Plastic |
Plastic |
| Body Material |
|
Bronze |
Pik döküm
(GG25) |
Iron (GG25) |
Iron (GG25) |
| Cover Type |
|
Electrostatic powder paint |
Electrostatic powder paint |
Electrostatic powder paint |
Electrostatic powder paint |
| Type of Instalation |
|
Horizontal |
Horizontal |
Horizontal |
Horizontal,
Vertical or Angular |
| Nominal Working Pressure |
|
10 bar |
10 bar |
10 bar |
16 bar |
| Typical Head Loss Cruve |
|
DN20 = 0,6
bar DN25 & DN40 = 1 bar |
1 bar |
1 bar |
cf. Typical
Head Loss Cruve's Chart |
|
|
50 |
65 |
80 |
100 |
125 |
150 |
200 |
250 |
300 |
|
Technical Data |
| Model |
- |
MFP |
MFP |
MFP |
MFP |
MFP |
MFP |
MFP |
MFP |
MFP |
| Minimum Flow (Qmin) |
m³/h |
1 |
1,2 |
1,4 |
2 |
3,5 |
4,5 |
8 |
25 |
30 |
| Transitional Flow (Qt) |
m³/h |
1,8 |
2 |
3,2 |
4,8 |
8,0 |
12 |
20 |
45 |
50 |
| Nominal Flow (Qn) |
m³/h |
15 |
25 |
45 |
70 |
100 |
150 |
250 |
500 |
600 |
| Maximum Debi (Qmax) |
m³/h |
30 |
60 |
90 |
140 |
200 |
300 |
500 |
1000 |
1200 |
|
|
|
DigiFlo's Models |
| 1100 Series
|
| -1110 – 2 totalizers (one
of them resettable) |
| -1120 - 1120 – Flow rate
display + 1110 features |
| -1130 – Pulse output +
1120 features |
| -1140 - 1140 – High / low
flow rate alarms + 1130 features |
| 1200 Series
|
| -1210 – Batch
functionality + 1100 Series features |
|
|
MayFlo-Turbine flow
meter manufacturer. |
|
 |
|
» |
Turbine FlowMeters |
|
» |
Battery life up to 10 years |
|
» |
No
external energy source needed |
|
» |
Can be
used on main pipes for flow |
|
» |
Shows
flow in terms of m³/h for 60 seconds |
|
» |
Wide
flow range with accuracy of ±%2 of measured value |
|
» |
Easy
to use, shows flow with the touch of a button |
|
» |
IP 68
Protection class |
|
» |
Vertical, horizontal or angled mounting available |
|
|
|
|
50 |
65 |
80 |
100 |
125 |
150 |
200 |
|
Technical Data |
| Minimum Flow (Qmin) |
m³/h |
3 |
5 |
8 |
12 |
20 |
30 |
50 |
| Maximum Flow (Qmax) |
m³/h |
40 |
60 |
120 |
180 |
200 |
400 |
550 |
| Maximum Working Pressure (Pmax) |
bar |
16 |
16 |
16 |
16 |
16 |
16 |
16 |
| Head Loss (DP) |
bar |
0.3 |
0.3 |
0.3 |
0.3 |
0.3 |
0.3 |
0.3 |
| Measuring Accuracy |
- |
±2% |
±2% |
±2% |
±2% |
±2% |
±2% |
±2% |
| Nominal Size of Meter
Flange |
DN |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
| Lenght |
mm |
200 |
200 |
225 |
250 |
250 |
300 |
350 |
| Height |
mm |
390 |
410 |
420 |
430 |
445 |
510 |
540 |
| Meter Centerline Height |
mm |
82 |
93 |
100 |
110 |
125 |
135 |
162 |
| Width |
mm |
165 |
185 |
200 |
220 |
250 |
285 |
340 |
| Flange Diameter |
mm |
165 |
185 |
200 |
220 |
250 |
285 |
340 |
| Connection Hole Centerline
Diameter |
mm |
125 |
145 |
160 |
180 |
210 |
240 |
295 |
| Number of Connection Hole |
- |
4 |
4 |
8 |
8 |
8 |
8 |
12 |
| Connection Hole Angle |
- |
45° |
45° |
22.5° |
22.5° |
22.5° |
22.5° |
15° |
| Connection Hole Diameter |
mm |
19 |
19 |
19 |
19 |
19 |
23 |
23 |
| LCD Display Size |
mm |
61X16 |
61X16 |
61X16 |
61X16 |
61X16 |
61X16 |
61X16 |
| LCD Display Angle |
- |
30° |
30° |
30° |
30° |
30° |
30° |
30° |
|
|
250 |
300 |
400 |
500 |
600 |
800 |
|
Technical Data |
| Minimum Flow (Qmin) |
m³/h |
80 |
120 |
200 |
300 |
750 |
1200 |
| Maximum Flow (Qmax) |
m³/h |
750 |
1000 |
2000 |
3000 |
3300 |
6000 |
| Maximum Working Pressure (Pmax) |
bar |
16 |
16 |
16 |
16 |
16 |
16 |
| Head Loss (DP) |
bar |
0.3 |
0.3 |
0.3 |
0.3 |
0.3 |
0.3 |
| Measuring Accuracy |
- |
±2% |
±2% |
±2% |
±2% |
±2% |
±2% |
| Nominal Size of Meter
Flange |
DN |
250 |
300 |
400 |
500 |
600 |
800 |
| Lenght |
mm |
450 |
500 |
500 |
500 |
500 |
600 |
| Height |
mm |
660 |
685 |
800 |
900 |
1030 |
1230 |
| Meter Centerline Height |
mm |
194 |
219 |
295 |
353 |
420 |
513 |
| Width |
mm |
405 |
460 |
580 |
715 |
840 |
1025 |
| Flange Diameter |
mm |
405 |
460 |
580 |
715 |
840 |
1025 |
| Connection Hole Centerline
Diameter |
mm |
355 |
410 |
525 |
650 |
770 |
950 |
| Number of Connection Hole |
- |
12 |
12 |
16 |
20 |
20 |
24 |
| Connection Hole Angle |
- |
15° |
15° |
11.25° |
9° |
9° |
7.5° |
| Connection Hole Diameter |
mm |
28 |
28 |
31 |
34 |
37 |
37 |
| LCD Display Size |
mm |
61X16 |
61X16 |
61X16 |
61X16 |
61X16 |
61X16 |
| LCD Display Angle |
- |
30° |
30° |
30° |
30° |
30° |
30° |
|
For more information and price list, please do not hesitate to contact us.
Email:
info@flow-meter-manufacturer.com
|
Electromagnetic Flow Meter Manufacturer
|
Turbine Flow Meter Manufacturer
|
|
Ultrasonic Flow Meter
Manufacturer
|
Flow
Meter manufacturer |
|
