The Expert Flowmeter manufacturer in Turkey

İİM joint-stock corporation  is one of the leading flow meter manufacturer in Istanbul-Turkey.

İİM manufactures  electromagnetic , turbine and ultrasonic flowmeters.

Quality electromagentic flowmeters from  İİM
    
DIGIMAG
DIGIMAG  ELECTROMAGNETIC  FLOW METER
GENERAL INFORMATION
The DIGIMAG-Series are electromagnetic insertion flovv sensors for use in conductive liquids in pipe sizes 1" to 8" (25mm to 200 mm.) Lacking moving parts, they are well suited for applications
which have particulates in the fluid and are therefore problematic for impellers or turbines. Other advantages
are insensitivity to viscosity and tolerance for pulsating flovvs. This makes them a good choice with fluids
with varying viscosity and with air-driven diaphragm pumps.Modularity. Simplicity and modularity are at the core of the DIGIMAG design. The basic flovv sensor has one output, which is pulse proportional to flovv rate.

Insertion Depth. Like all insertion flovv sensors, the DIGIMAG Series extend into the pipe and measure the velocity of the fluid in a particular area of the pipe. The chosen insertion depth is the “critical point”, or the area of the flovv stream which maintains the average velocity across a wide range of flovv rates. This is necessary because the shape of the velocity profile changes as the rate increases. (It transitions from a “bullet” to more of a “plug” shape).
 

Quality turbine Flowmeters (paddle wheel) from İİM

 
DIGIPRO
DIGIPRO    ( PADDLE WHEEL )
General Information
The DIGIPRO Series are impeller-type insertion meters designed for use in pipe sizes 1/2" to 8". High-quality jewel bearings and nickel-bound tungsten carbide shaft are used for maximum life and extreme low friction. Bodies are machined from solid rod for maximum precision. Low-flovv performance is superior. The rotation of the rotor is detected by a non-drag Hall-effect sensor. Output is a pulse-type square wave, which can be sent long distances (up to 2,000 feet) without a transmitter. This signal can be connected directly
to controls, as well as PLC’s, counters, and computer cards. DIGIPRO meters are ideal for chemical proportioning applications. For rate and total display, as well as pump pacing, the flovv indicator can be mounted directly on the DIGIPRO Series, or remotely on a wall or panel. The DIGIPRO Series require special fittings, since they are not depth-adjustable. Installation in the fitting ensures correct depth placement in the pipe. Fittings are included.
 

Quality ultrasonic flowmeter from İİM

SONOPRO
Typical Applications
water,sewage,seawater,water distribution,power plants,cooling water,
Boiler feed water,Mining leaching and retur flovvs,Liquid petroleum products
Pipeline leak detection
Chemicals
Energy management systems
Process plant water and chemicals
 

HIGHLIGHTS
Accuracy better than 1%
High repeatability 0.3%
One meter for a wide range of pipe sizes:1-200"(25mm-5000mm)
Wide bi-directional flow range:-40,+40 ft/s (-12,+12m/s)

 

About The Founder Of İİM:

Hüsamettin YALHI was born in 1909 and was raised under the troublesome conditions prevailing at the time. After completing his education and serving his country in millitary service, he worked as a physics teacher in Amasya and Istanbul Fevziye High Schools for 4 years.

As a science official he prepared the regulations on measuring and weighing devices while working at the Department of Measuring and Department of Measurements and Standards of the Ministry of Industry and Commerce in 1935.

In 1945 he started his own business establishing the core of our current firm with manifacture of water meter parts and test benches. As a result of his efforts and in 1955 he established the İİM Water Meters Factory. With these efforts he managed to put a stop to the importation of meters as of 1956. He died in Istanbul on March 17, 1993.
 

About Company:

Our current group consists of four companies operating in our two facilities located in the Bilecik Organized Industrial Estate and in Istanbul over an open area of 60.000m² and a closed area of 12.000m². It has the integrated plants designed to meet all the requirements, such as bronze casting, die casting and processing lines, finishing automation shops, electrostatic paint plants, cold and hot forging lines, molding shops, and a plastic injection plant consisting of CNC machinery, and of quality assurance and of calibration laboratories. It is manufacturing all parts at its own facilities resting on its specialized workforce of 500 people. Our subsidiary industry dependency is only on raw materials.  more

For more information about 
 electromagnetic, turbine and ultrasonic flow meters
and price list, please do not hesitate to contact us.

 Click for  The Contact Form 

certificates ,about us 

| Electromagnetic FlowMeter Manufacturer | Turbine FlowMeters Manufacture | | Ultrasonic Flow Meters Manufacturer | Flow Meter manufacturers |
links,Links shirt machine manufacturer, eccentric press manufacturer, textile machines manufacturer, men suit manufacturer  ferforje stanbul  , granit kesim  power cable manufacturer 1 11 3 4